ToolTrucks.Com Parts and Accessory Store is now ToolTruckParts.com, up and running now.
This store will transition to the new address shortly.  We might not "be here"
next time you visit, but we will definitely be here: http://tooltruckparts.com/

My Account
$0 - $24.99
$25 - $49.99
Over $50
Home > LED LIGHTING - FIXTURES, BARS, STRIPS & EXTERIOR

LED Strip Light Quick Connector

Part Number LEDQC
LED Strip Light Quick Connector
Email a friend Email a friend
Price
Your Price:  
$2.00
Free Shipping
Share |
Quantity
Add to Gift Registry
Description
The LED light strips we sell can be cut every three diodes, which is about every 2". This makes for an easier install when you are working under-shelf. Once you cut a strip, there are two ways to wire the light strip into your truck lighting system. One, solder wires onto the cut ends. Or Two, use this inexpensive Quick Connect. It has a crimp-able connector on one end and two wires on the other end.

Here are the steps:

1. Measure the length of LED strip you need.
2. Look at the strip and locate a cutting line, which is located every three diodes. To find a line, look for 4 copper colored dots with a vertical line between them.
3. With a razor blade, carefully cut along the line.
4. Peel back the gel protective covering on the lights.
5. Line up the pins on the connector so they go directly through the copper dots and squeeze together.
6. Test your connection, wrap with electrical tape, and you're done.
Related Items
LED White Light Strip, 16' long, adhesive backed, 12 volt
LED White Light Strip, 16' long, adhesive backed, 12 volt
Your Price: $49.00
On sale: $39.00 On Sale
  
Recently Viewed Items